Dragging the Shutter

Posted on: August 28th, 2012 3

What Is It?

“Dragging the shutter” is a technique in which you combine the stop-action of a flash with a slow shutter speed. The resulting image is one where you see motion blur PLUS a clearly defined subject….er sort of. This technique also calls into play another feature that your camera offers; First (or Front) Curtain Sync, and Second (or Rear) Curtain Sync. Before I get into all that, here is an image I took dragging the shutter:

This is a highly stylized kind ofimage, and therefor not one that you’d take all the time. Plus, it is very much hit-or-miss, in that you’ll get many more useless shots than good ones…..at least that’s been my experience.

The Stop-Action part

Flashes have a very short duration, meaning the amount of time that the light is “on” is usually around 1/1000 of a second, or even shorter if the flash output is less than full-power. That means if the flash is the ONLY light source, you can use it instead of the shutter to stop the action. Let’s say you set your camera’s exposure so you have a slow-ish shutter (say 1/2 second) and a small aperture, say @ f/22, so when you pop the shutter the resulting image is just a black frame. Let’s say you keep the same settings but this time add a flash, which will become the dominant (as in “only”) light source. Since that flash duration is very fast (@ 1/1000 of a second), it freezes motion.

So with the above scenario in mind, let’s say you shoot someone jumping. Since the only viable source of light comes from the flash, even with a slow shutter the resulting image will be stop-motion or freeze-frame because the camera can only “see” the subject for the duration of the flash. Once the flash ends, even though the shutter is still open, the sensor cannot “see” anything as there is no ambient light due to the ambient-cancelling exposure setting.

The Ambient Light Part

Using the above hypothetical scenario, let’s say instead of an ambient-light-cancelling f/stop setting of f/22, we instead use f/8…or f/5.6….or whatever. Since we’ve opened up the aperture MUCH wider, more light gets into the camera during that 1/2 second than before; enough light so we get ambient light influencing the scene. In fact, at f/5.6 we probably have enough light so if the flash DOESN’T fire we still get an image. Your on-camera light meter will tell you exactly how much ambient light is getting in (I usually set an ambient exposure of 1 stop under).

Obviously with a shutter speed of 1/2″, you are getting tons of motion blur, not only from the subject(s) you are shooting, but also from camera shake (assuming you are shooting hand-held). So any image thus shot will be, well, blurry! However, if we add the flash back into the mix, we’ll get an image that is both sharp AND blurry! Remember, the flash duration is very fast….at least 1/1000″ in most cases…..so the flash will stop the motion of any moving subject, and since the shutter stays open after the flash has died, it is still gathering light. In this way you get an image that is a combination of ambient plus flash.

First and Second Curtain Sync

There are 2 possible events that trigger the flash; one is when the shutter first opens, and the other is when the shutter closes. At reasonably fast shutter speeds that don’t record any motion blur, it doesn’t matter one bit which of the 2 events trigger the flash. However, at slower speeds that DO capture motion blur, it matters a great deal when the flash fires. At 1/2″, if the flash fires when the shutter opens (front or first curtain sync), the stop-action gets captured first, then the motion blur is captured for the duration of the shutter opening. In real-world terms this means that if you are shooting a passing motorcycle, the flash will get the solid image and the slow shutter gets the blur. In effect, the blur will be in front of the motorcycle, which actually looks like the motorcycle is moving backwards since the blur creates a “trail” that is in front of the motorcycle. However, if the flash fires right before the shutter closes (second or rear curtain sync), the opposite happens. You open the shutter as the motorcycle passes, the ambient light gets recorded for the duration, and as the shutter closes the flash fires, creating the stop-motion image. In this case, the blur is BEHIND the motorcycle, so it look like the motorcycle is moving forward….which of course it is.

For some bizarre reason that I cannot understand, all DSLRs are set with 1st curtain sync as the default. I recommend you set your camera to 2nd curtain sync and leave it there! When you are shooting at fast speeds you won’t see a difference, but when you are shooting at slow speeds and using a flash the blur will be behind the subject’s forward motion, not in front. You will have to go into your cameras manual and read how to set this. On Canon cameras, it is in the Custom Functions menu under Flash Control. I’m sure it is very similar for Nikon or any other make.

Here are a few examples using this technique. Click on the thumbnail to view a larger version of the image:

Conclusion

In all of the above shots, I used a shutter speed of somewhere between 1/8 and 1/4. Obviously I was shooting people dancing, which is a good time to drag the shutter. I think you’ll agree that the above shots not only better depict motion than a stop-action shot would have, but also have a certain energy thanks to the combination of slow shutter blur and stop-action flash. I should warn you, this takes some practice. I shot 3 different dances before I finally arrived at the best shutter-speed and flash strength combination. I can’t stress enough that you really have to experiment, because every situation is different. I’d suggest trying this technique out in different low-light scenarios. Shooting a band in a bar is a great place to try this, for just one example.

3 Responses

  1. Gurdeep Rathi says:

    Very interesting concept.. Will have to experiment on it.. Thanks Gary!

  2. Wayne King says:

    Situation: outside family portrait. Family in shade and background very bright. (2-3 stops difference)
    72 inch umbrella with prophoto light to light family
    How would you determine power of flash to match background and not exceed sinc speed limitations on camera?
    If it is VERY bright(AZ) how would a 2 or 4 stop nD filter fit into the equation?
    Thank you for your advice
    Very good article

    • Gary Dates says:

      This illustrates a big problem with slow (relatively) sync speeds. You need a large aperture to get the most out of the flash, but can’t go beyond sync speed with the shutter to stop down ambient. You mentioned using an ND filter. This would help with controlling ambient, but you’re also stopping down flash output. I don’t know how much headroom you have with your Prophoto, but I’m guessing if you can get ambient down where you need it with said ND filter, your gonna need a s**tload of flash output to get a decent flash vs ambient ratio at sync speed. You’re probably already loosing at least a stop with a 72″ umbrella, probably even more, and since you are asking the question to begin with, I’m guessing you can’t get enough output. 🙂

      A few suggestions, none of which are ideal:

      1 – Quite honestly, the easiest solution is to simply borrow, rent, or even buy a Fuji X100!! It has insanely fast, sunlight-killing sync speeds! I know, I know…..it isn’t a full frame camera. Plus, it has a built-in 35mm (equivalent) f/2 lens. I say, so what? The reviews I’ve read all agree that Fuji has managed to get full-frame image quality out of a APS-C size sensor. The 35mm focal length could be an issue, but I’m guessing that a family portrait gets you far enough away in terms of focusing distance that you won’t get any noticeable distortion. I have been wanting this little bad-ass camera for a while, but can’t justify the expense right now. It would solve your problem easily. I get that its small size is not impressive and may dissuade some shooters who want to project that “big-ass camera = pro” image. However, results speak for themselves and at the end of the day you will deliver an image your clients will love. Who cares how you got there?

      Not for you? Ok.
      2 – Ditch the umbrella. I know you’ll loose that soft light, but if you place the strobe in the right spot you can light the family in a pleasing way with hard light. That means not making it as side-lit as you’d probably prefer…….putting it near the camera for more directional light. That at least maximizes output.

      Failing the 2 above suggestions, I’m out of in-camera ideas. Time to fix in post. There are several things to try:
      3 – This next one is crazy, I know, but just might work! Assuming you are already at full-power on your Prophoto, I’m guessing your recycle time isn’t all that fast. If that is the case, set your camera to “Auto-bracketing”, and make sure the exposure order is such that the in-camera exposure fires first. This 1st exposure would be for the flash on family mostly.The you can set several stops over and under. Put your camera on a tripod and pop off 3 quick frames (you did say ‘portrait’ so subject movement shouldn’t be a factor). The 1st frame will be the one with an exposure that maximizes the flash output to light the family. Most likely ambient is too hot. you’ll also get 2 more frames, which due to slow recycle will not have any flash in there….one under and one over. You can combine the 1st frame with the under-exposed frame in Photoshop…..which is why a tripod is essential.

      4 – Can you say HDR? I know, HDR has gotten a bad name as sooooo many people want to get that “vomit-of-color” overly processed look, but used correctly, HDR processing can solve the very issue you are facing, which, at the end of the day is a dynamic range issue. Set your camera to Auto-bracketing, and set it to 2 stops under on one side and 2 stops over on the other. Now you can pop off 3 quick frames (tripod again) with a 4 stop differential. Use either Photomatix, or HDR Pro in Photoshop CS6 (much improved over CS5), to combine the 3 bracketed shots. If you are mindful of not over-processing, you should get a pretty good, realistic-looking shot!

      5- Lightroom 4 might also be of service, specifically the Highlight Slider and Adjustment Brush. If you have overexposed ambient by not much more than 2 stops, moving the Highlight slider to the left will bring back detail…..say cloud detail in the sky……without effecting overall exposure. You could then take the Adjustment brush and paint in MORE exposure on the subjects.

      I wish I could tell you that there’s a way to overcome slow sync in bright sunlight, but greater minds than mine have not been able to figure that one out. I follow David Hobby on Strobist.com and he talks about this issue a lot…..with no easy solution. 🙁

Leave a Reply to Gurdeep Rathi

You must be logged in to post a comment.